Peak Design Mobile Car Mount VHB Black

A phone mount that is so beautiful, secure, and intuitive, that once you install it in your car, you'll feel like it was there from the start. That's because, unlike flimsy, bulky plastic car mounts that stick out like sore thumbs, the Peak Design Car Mount is made from a beautiful machined/anodized aluminum and mounts directly to your dash or console via an ultra-durable 3M VHB pad. Ultra-strong MagSafe-compatible magnets hold your phone in place even during the most spirited driving‚ we call the mounting system SlimLink and it's so fast and secure, it borders on magic. Adjust the viewing angle with a buttery-smooth aluminum ball head. Car Mount's small footprint lets you mount your phone right where you want it without obstructing your view of the road.
Available in standard or wireless charging models. With the charging model, the mount's magnetic connection system ensures perfect charging coil alignment every time. That means more consistent and efficient charging and no more surprise battery outages.

View our Vent Mount for additional mounting options.

Requires a Peak Design Case or Universal Adapter (sold separately). Also works with MagSafe phones and phone cases. Charging may not be possible or optimal when using the Universal Adapter. Best results when attached to flat, hard, non-porous, non-textured surfaces.

Features

SLIMLINE: A MAGICAL CONNECTION SYSTEM

• Built-in magnetic attachment technology (called SlimLink™) is ultra-secure and feels like magic
• Works with Peak Design Cases and MagSafe** phones/cases
• Holds your phone during even the bumpiest of rides
• Attachment/detachment is instant and 1-handed

GORGEOUS MINIMALIST DESIGN

• Low-profile, the aesthetically clean design complements your car’s interior
• Beautiful machined/anodized aluminum construction

BUILT TO LAST

• Premium materials and stout construction mean this mount will last for many phones to come
• Guaranteed for life, like all Peak Design products

ENDLESS MOUNTING LOCATIONS

• Works in a variety of dashboard and console locations (vehicle dependent)
• Installs with ultra-strong, ultra-durable, weatherproof 3M VHB adhesive
• Can be safely removed without leaving damage or residue (see SPECS tab for instructions
• Enables mounting of your phone that doesn't block your field of view while driving

ULTRA-SMOOTH ADJUSTMENT

• Smooth, stable viewing angle adjustment with a wide range of articulation
• Ballhead designed by Peak Design tripod engineers
• Holds phone in portrait or landscape mode

BEST-IN-CLASS CHARGING*

• Wirelessly charges your phone as soon as the phone is magnetically attached to the mount
• Included a high-quality USB-C cable and a low-profile cigarette lighter adapter
• Included clips for discreet cable routing

PHONE/CASE COMPATIBILITY

• Works with any phone with a Peak Design Case or Adapter
• Also works on any MagSafe phone or case
• Wireless charging may not be possible or optimal when using Universal Adapter

CAR/SURFACE COMPATIBILITY

• Best results when mounted on a smooth, flat surface on your auto dash or console
• Inconsistent adhesion to textured or porous surfaces
• Attaching to unintended locations or materials may be possible, but may result in improper adhesion, surface damage, or improper viewing angle
• Includes a 2nd adhesive pad for remounting/repositioning

In The Box

CHARGING CAR MOUNT:

• 1x Charging Car Mount
• 3x Charging Cable Routing Clips
• 1x 1m Charging Cable (USB-C to USB-C)
• 1x Cigarette Lighter Power Adapter
• 1x Extra Adhesive Pad (not pictured)

CAR MOUNT:

• 1x Car mount
• 1x Extra Adhesive Pad (not pictured)

Specification

CAR MOUNT SPECS

• DIMENSIONS - Mount Head: 5.5cm x 5.5cm x 0.7cm (2.2" x 2.2" x 0.3"), Total Height (from the dashboard): 3.7cm (varies depending on ball head position), Base Pad: 3cm x 5cm (1.9" x 2.0")
• WEIGHT - 58g (2.05oz)
• INSTRUCTION - Product Manual

CHARGING CAR MOUNT SPECS

• DIMENSIONS - Head: 5.8cm x 5.8cm x 1.2cm (2.3" x 2.3" x 0.5"), Total Height (from the dashboard): 4.5cm (varies depending on ball head position), Base Pad: 3cm x 5cm (1.9" x 2.0")
• WEIGHT - 95.4g (3.4oz), Including charging hardware: 133.5g (4.7oz)
• CERTIFICATIONS - RoHS Compliant, FCC ID: 2A294MCMAA, IC: 27367-MCMA

MATERIALS (BOTH MODELS)

• Machined/anodized aluminum mounting head & stem
• Grippy silicone mounting pad with Tinuvin 770 UV-stabilizer
• High-temp neodymium mounting magnets

ADHESIVE REMOVAL (BOTH MODELS)

• Can be safely removed without damaging surfaces or leaving residue in most instances
• Hold dental floss between the adhesive pad and dash, and pull the floss in a sawing motion to break the adhesive bond
• If there is remaining residue, roll it off with your finger or remove it with blue painter's tape
• Includes a 2nd adhesive pad for remounting/repositioning

MADOVERBIKING (MOB) is not a manufacturer of products that are sold on the website. MOB is only a reseller/retailer/e-tailer selling brand products via distributors.

The warranty is as per the manufacturer and is covered by them.

However, MOB will only facilitate the warranty and claim process and will still ensure that you best utilize your investments and we help solve your queries & defective products as earliest as possible.

The Warranty Policy is different for different brands and is covered by the manufacturer and shall be applicable in the Indian subcontinent only. We have summarized the policies by various brands, and categories.

Warranty excludes

Brand warranty does not cover Product breakage, scratches, damages caused by accident, mishandling, negligence, shock, tampering and loss of components or accessories, improper use or storage of the product; unauthorized modifications or repairs; or normal wear & tear.

Warranty conditions

• This warranty will automatically terminate on the expiry of the warranty period.
• This warranty is valid only when purchased through madoverbiking.com
• The decision of the company (manufacturer/distributor) the nature of the defects and applicability of the warranty will be final.
• The company (manufacturer/distributor) will, in no event be liable or obligated for the payments/refund of any special incidental or consequential damages

Warranty Requirements

Please ensure all three requirements below are met for us to process your warranty claim:

• Please email/WhatsApp us the pictures of the product to be duly validated to support@madoverbiking.com/ 9315376395 along with the order ID/invoice.
• Serial number is mandatory for Melian products. Without a valid serial no., warranty claims will not be processed
• Pack all the products properly in One single box to avoid any transit-related damage.
• Please send back all accessories received along with the product to avoid any delays in the claim.

Please note that we do not cover return shipping costs for inbound warranty claims.

Standard Brand Warranty* - Warranty not explicitly mentioned by manufacturer, but can be discussed on a case-to-case basis. You may visit their respective website for further details.

We are still adding a lot of products and If you can't find any product, just message us on our whatsapp no. here and we will get it arranged for you

You can also email us at support@madoverbiking.com or call us at 9315376395