The CatEye Bluetooth Speed/Cadence sensor ISC-12 works with a variety of CatEye bike computers (sold separately) or your other Bluetooth® Smart device to record speed and cadence.
Works with all devices/ and mobile apps. A perfect data companion for all your rides.
See illustrations
1. Temporarily attach the sensor to the left chain stay.
(1) Loosen the sensor screw using a Phillips screwdriver and check that the sensor arm moves.
Sensor arm
Sensor screw
(2) Attach the sensor rubber pad to the sensor.
Sensor
rubber pad
(3) Refer to the illustration and temporarily attach the sensor to the left chain stay with nylon ties.
left chain stay
Nylon tie
Caution
Do not fully tighten the nylon ties. Once the nylon ties are fully tightened they cannot be removed.
2. Temporarily attach the magnet.
Inside of the crank
Cadence magnet
Spoke
Nylon tie
Sensor zone
Wheel magnet
(1) Using a nylon tie, temporarily attach the cadence magnet to the inside of the left crank arm so that it faces the cadence sensor zone.
(2) Rotate the sensor arm and temporarily attach the wheel magnet to a spoke facing the speed sensor zone.
* If the sensor cannot is not positioned so that both magnets (speed and cadence) pass through their respective sensor zones, reposition the sensor and the magnets so that each magnet passes through its sensor zone.
3. Adjust the gap between the sensor zone and the magnet.
(1) Tilt the sensor so that the gap between the cadence magnet and the cadence sensor zone is approximately 3 mm, then fasten the sensor securely with nylon ties.
Cadence magnet
(2) Rotate the sensor arm so that the gap between the wheel magnet and the speed sensor zone is approximately 3 mm, then tighten the sensor screw securely.
Wheel magnet
Sensor screw
4. Secure all parts.
Tighten the sensor's nylon ties, the sensor screw, and the magnets, and check that they are not loose.
Trim off the excess nylon tie.
* If using pedals with steel axles, the cadence magnet can be attached magnetically to the pedal axle. In this case, remove the adhesive tape from the magnet and do not use the nylon tie.
MADOVERBIKING (MOB) is not a manufacturer of products that are sold on the website. MOB is only a reseller/retailer/e-tailer selling brand products via distributors.
The warranty is as per the manufacturer and is covered by them.
However, MOB will only facilitate the warranty and claim process and will still ensure that you best utilize your investments and we help solve your queries & defective products as earliest as possible.
The Warranty Policy is different for different brands and is covered by the manufacturer and shall be applicable in the Indian subcontinent only. We have summarized the policies by various brands, and categories.
|
Brand/Category |
Warranty Duration |
|
Electronics |
Standard Brand Warranty*
|
| Maintenance | No warranty |
|
Accessories |
Standard Brand Warranty* |
| Apparels | No warranty unless the product is received in a damaged condition |
| Tires/Tubes | No warranty unless the product is received in a damaged condition |
|
Components |
Standard Brand Warranty* |
Warranty excludes
Brand warranty does not cover Product breakage, scratches, damages caused by accident, mishandling, negligence, shock, tampering and loss of components or accessories, improper use or storage of the product; unauthorized modifications or repairs; or normal wear & tear.
Warranty conditions
- This warranty will automatically terminate on the expiry of the warranty period.
- This warranty is valid only when purchased through madoverbiking.com
- The decision of the company (manufacturer/distributor) the nature of the defects and applicability of the warranty will be final.
- The company (manufacturer/distributor) will, in no event be liable or obligated for the payments/refund of any special incidental or consequential damages
Warranty Requirements
Please ensure all three requirements below are met for us to process your warranty claim:
- Please email/WhatsApp us the pictures of the product to be duly validated to support@madoverbiking.com/ 9315376395 along with the order ID/invoice.
- Serial number is mandatory for Melian products. Without a valid serial no., warranty claims will not be processed
- Pack all the products properly in One single box to avoid any transit-related damage.
- Please send back all accessories received along with the product to avoid any delays in the claim.
Please note that we do not cover return shipping costs for inbound warranty claims.
Standard Brand Warranty* - Warranty not explicitly mentioned by manufacturer, but can be discussed on a case-to-case basis. You may visit their respective website for further details.
The CatEye Bluetooth Speed/Cadence sensor ISC-12 works with a variety of CatEye bike computers (sold separately) or your other Bluetooth® Smart device to record speed and cadence.
Works with all devices/ and mobile apps. A perfect data companion for all your rides.
See illustrations
1. Temporarily attach the sensor to the left chain stay.
(1) Loosen the sensor screw using a Phillips screwdriver and check that the sensor arm moves.
Sensor arm
Sensor screw
(2) Attach the sensor rubber pad to the sensor.
Sensor
rubber pad
(3) Refer to the illustration and temporarily attach the sensor to the left chain stay with nylon ties.
left chain stay
Nylon tie
Caution
Do not fully tighten the nylon ties. Once the nylon ties are fully tightened they cannot be removed.
2. Temporarily attach the magnet.
Inside of the crank
Cadence magnet
Spoke
Nylon tie
Sensor zone
Wheel magnet
(1) Using a nylon tie, temporarily attach the cadence magnet to the inside of the left crank arm so that it faces the cadence sensor zone.
(2) Rotate the sensor arm and temporarily attach the wheel magnet to a spoke facing the speed sensor zone.
* If the sensor cannot is not positioned so that both magnets (speed and cadence) pass through their respective sensor zones, reposition the sensor and the magnets so that each magnet passes through its sensor zone.
3. Adjust the gap between the sensor zone and the magnet.
(1) Tilt the sensor so that the gap between the cadence magnet and the cadence sensor zone is approximately 3 mm, then fasten the sensor securely with nylon ties.
Cadence magnet
(2) Rotate the sensor arm so that the gap between the wheel magnet and the speed sensor zone is approximately 3 mm, then tighten the sensor screw securely.
Wheel magnet
Sensor screw
4. Secure all parts.
Tighten the sensor's nylon ties, the sensor screw, and the magnets, and check that they are not loose.
Trim off the excess nylon tie.
* If using pedals with steel axles, the cadence magnet can be attached magnetically to the pedal axle. In this case, remove the adhesive tape from the magnet and do not use the nylon tie.
MADOVERBIKING (MOB) is not a manufacturer of products that are sold on the website. MOB is only a reseller/retailer/e-tailer selling brand products via distributors.
The warranty is as per the manufacturer and is covered by them.
However, MOB will only facilitate the warranty and claim process and will still ensure that you best utilize your investments and we help solve your queries & defective products as earliest as possible.
The Warranty Policy is different for different brands and is covered by the manufacturer and shall be applicable in the Indian subcontinent only. We have summarized the policies by various brands, and categories.
|
Brand/Category |
Warranty Duration |
|
Electronics |
Standard Brand Warranty*
|
| Maintenance | No warranty |
|
Accessories |
Standard Brand Warranty* |
| Apparels | No warranty unless the product is received in a damaged condition |
| Tires/Tubes | No warranty unless the product is received in a damaged condition |
|
Components |
Standard Brand Warranty* |
Warranty excludes
Brand warranty does not cover Product breakage, scratches, damages caused by accident, mishandling, negligence, shock, tampering and loss of components or accessories, improper use or storage of the product; unauthorized modifications or repairs; or normal wear & tear.
Warranty conditions
- This warranty will automatically terminate on the expiry of the warranty period.
- This warranty is valid only when purchased through madoverbiking.com
- The decision of the company (manufacturer/distributor) the nature of the defects and applicability of the warranty will be final.
- The company (manufacturer/distributor) will, in no event be liable or obligated for the payments/refund of any special incidental or consequential damages
Warranty Requirements
Please ensure all three requirements below are met for us to process your warranty claim:
- Please email/WhatsApp us the pictures of the product to be duly validated to support@madoverbiking.com/ 9315376395 along with the order ID/invoice.
- Serial number is mandatory for Melian products. Without a valid serial no., warranty claims will not be processed
- Pack all the products properly in One single box to avoid any transit-related damage.
- Please send back all accessories received along with the product to avoid any delays in the claim.
Please note that we do not cover return shipping costs for inbound warranty claims.
Standard Brand Warranty* - Warranty not explicitly mentioned by manufacturer, but can be discussed on a case-to-case basis. You may visit their respective website for further details.
