X
image

FREE SHIPPING ABOVE 1999/-

SKU: 11.4015.544.060

ROCK SHOX SERVICE PART COMPDMPR MCDNA RMT17 SIDB/RBA RLT 120 11.4015.544.060

VendorROCK SHOX
Regular price Rs. 6,990.00
Sale price Rs. 6,990.00 Regular price
Sale Sold out
Unit price
/per 
Tax included. Shipping calculated at checkout.
This is a pre order item. We will ship it when it comes in stock.

Features

  • Remote kits for upgrading from non-remote systems to hydraulic XLoc remote or to replace remote-compatible dampers when not offered separately
  • Kits include: handlebar remote-control XLoc, PushLoc, or PopLoc kit with tubing/fittings or cable/housing and a matching upper, remote-compatible compression damper assembly (refer to RockShox manuals for correct oil volumes with upgraded dampers)
  • SID-B upper chassis (28.2mm stanchion ID): '12-15 SID 120mm, '12-15 SID 100/80mm (except '12 1-1/8" carbon), and '12+ Reba models
  • SID-A upper chassis (27.8mm stanchion ID): '09-11 SID 100/80mm (and '12 1-1/8" carbon), '05-11 Reba, '05-10 Pike, and '06-12 Revelation models
  • Specific Pike/Revelation/Sektor/Reba kits use a longer damper tube (optimized for longer travel) and should not be used in SID-A systems with less than 120mm max travel
  • MoCo (MotionControl) / MiCo (MissionControl): XX (XLoc hydraulic remote compatible), DNA ('12+ evolution including PushLoc cable or 'XX-level' XLoc hydraulic remote options), BB (BlackBox titanium spring tube), IS (integrated speedstack), DH (separate high/low compression); and Turnkey (lockout) upper, compression damper assemblies
  • BlackBox (Ti spring tube) dampers are being phased-out for 2012+ (substitute either XX or DNA models if needed application no longer listed)
  • Non-remote (NR) or remote-compatible (RC) damper units: handlebar-remote levers sold separately unless noted
  • Standard equipment PopLoc kits can be upgraded to PopLoc-Adjust: left-hand (RS-3209), right-hand (RS-3208); or PushLoc (RS-3210)

MADOVERBIKING (MOB) is not a manufacturer of products that is sold on the website. MOB is only a reseller/retailer/e-tailer selling brand products via distributors.

The warranty is as per the manufacturer, and is covered by them.

However, MOB will only facilitate the warranty and claim process and will still ensure that you best utilize your investments and we help solve your queries & defective products as earliest as possible.

The Warranty Policy is different for different brands and is covered by the manufacturer and shall be applicable in Indian subcontinent only. We have summarized the policies by various brands, and categories.

Brand/Category

Warranty Duration

Electronics

Cateye – 2 years

Niterider – 1 year

Meilan – 6 months

Sigma – 1 year

Maintenance  No warranty

Accessories

Standard Brand Warranty*

Apparels No warranty unless product is received in a damaged condition
Tires/Tubes No warranty unless product is received in a damaged condition

Components

Standard Brand Warranty*

Warranty excludes

Brand warranty does not cover: Product breakage, scratches, damages caused by accident, mishandling, negligence, shock, tampering and loss of components or accessories, improper use or storage of the product; unauthorized modifications or repairs; normal wear & tear.

Warranty conditions

  • This warranty will automatically terminate on the expiry of the warranty period.
  • This warranty is valid only when purchased through madoverbiking.com
  • The decision of the company (manufacturer/distributor) the nature of the defects and applicability of the warranty will be final.
  • The company (manufacturer/distributor) will, in no event be liable or obligated for the payments/refund of any special incidental or consequential damages

Warranty requirements

Please ensure all three requirements below are met for us to process your warranty claim:

  • Please email/WhatsApp us the pictures of the product to be duly validated to support@madoverbiking.com/ 9315376395 along with the order ID/invoice .
  • Serial number is mandatory for Melian products. Without a valid serial no., warranty claims will not be processed
  • Pack all the product properly in One single box to avoid any transit related damage.
  • Please send back all accessories received along with the product to avoid any delays in claim.

Please note that we do not cover return shipping costs for inbound warranty claims.

Standard Brand Warranty* - Warranty not explicitly mentioned by manufacturer, but can be discusses on case-to-case basis. You may visit their respective website for further details.

 

Description

Features

  • Remote kits for upgrading from non-remote systems to hydraulic XLoc remote or to replace remote-compatible dampers when not offered separately
  • Kits include: handlebar remote-control XLoc, PushLoc, or PopLoc kit with tubing/fittings or cable/housing and a matching upper, remote-compatible compression damper assembly (refer to RockShox manuals for correct oil volumes with upgraded dampers)
  • SID-B upper chassis (28.2mm stanchion ID): '12-15 SID 120mm, '12-15 SID 100/80mm (except '12 1-1/8" carbon), and '12+ Reba models
  • SID-A upper chassis (27.8mm stanchion ID): '09-11 SID 100/80mm (and '12 1-1/8" carbon), '05-11 Reba, '05-10 Pike, and '06-12 Revelation models
  • Specific Pike/Revelation/Sektor/Reba kits use a longer damper tube (optimized for longer travel) and should not be used in SID-A systems with less than 120mm max travel
  • MoCo (MotionControl) / MiCo (MissionControl): XX (XLoc hydraulic remote compatible), DNA ('12+ evolution including PushLoc cable or 'XX-level' XLoc hydraulic remote options), BB (BlackBox titanium spring tube), IS (integrated speedstack), DH (separate high/low compression); and Turnkey (lockout) upper, compression damper assemblies
  • BlackBox (Ti spring tube) dampers are being phased-out for 2012+ (substitute either XX or DNA models if needed application no longer listed)
  • Non-remote (NR) or remote-compatible (RC) damper units: handlebar-remote levers sold separately unless noted
  • Standard equipment PopLoc kits can be upgraded to PopLoc-Adjust: left-hand (RS-3209), right-hand (RS-3208); or PushLoc (RS-3210)
Warranty & Claims

MADOVERBIKING (MOB) is not a manufacturer of products that is sold on the website. MOB is only a reseller/retailer/e-tailer selling brand products via distributors.

The warranty is as per the manufacturer, and is covered by them.

However, MOB will only facilitate the warranty and claim process and will still ensure that you best utilize your investments and we help solve your queries & defective products as earliest as possible.

The Warranty Policy is different for different brands and is covered by the manufacturer and shall be applicable in Indian subcontinent only. We have summarized the policies by various brands, and categories.

Brand/Category

Warranty Duration

Electronics

Cateye – 2 years

Niterider – 1 year

Meilan – 6 months

Sigma – 1 year

Maintenance  No warranty

Accessories

Standard Brand Warranty*

Apparels No warranty unless product is received in a damaged condition
Tires/Tubes No warranty unless product is received in a damaged condition

Components

Standard Brand Warranty*

Warranty excludes

Brand warranty does not cover: Product breakage, scratches, damages caused by accident, mishandling, negligence, shock, tampering and loss of components or accessories, improper use or storage of the product; unauthorized modifications or repairs; normal wear & tear.

Warranty conditions

  • This warranty will automatically terminate on the expiry of the warranty period.
  • This warranty is valid only when purchased through madoverbiking.com
  • The decision of the company (manufacturer/distributor) the nature of the defects and applicability of the warranty will be final.
  • The company (manufacturer/distributor) will, in no event be liable or obligated for the payments/refund of any special incidental or consequential damages

Warranty requirements

Please ensure all three requirements below are met for us to process your warranty claim:

  • Please email/WhatsApp us the pictures of the product to be duly validated to support@madoverbiking.com/ 9315376395 along with the order ID/invoice .
  • Serial number is mandatory for Melian products. Without a valid serial no., warranty claims will not be processed
  • Pack all the product properly in One single box to avoid any transit related damage.
  • Please send back all accessories received along with the product to avoid any delays in claim.

Please note that we do not cover return shipping costs for inbound warranty claims.

Standard Brand Warranty* - Warranty not explicitly mentioned by manufacturer, but can be discusses on case-to-case basis. You may visit their respective website for further details.

 

Hi there

Welcome Guest
We typically reply within minutes
James
Hello! James here from Support team,this is sample text. Original text will display as per app dashboard settings