SHOCK ABSORBER SYSTEM
The special “Shock Absorbers” on the side of the ST7 Vision Superflow allow to accommodate the disconnections of the road and significantly increase comfort.
INTEGRATED SAFETY SYSTEM
The ST7 Vision Superflow is the first of Selle Italia’s saddles equipped with a rear LED that allows you to ensure visibility and safety even during the day.
GEL INSERTS
The special Gel inserts inside the padding allow the ST7 Vision Superflow to ensure a high level of comfort.
Specifications
-
Cover Material: Soft-Tek
-
Rail Material: FeC Alloy
-
Padding: Gel
-
Use: Road, MTB
-
Dimensions: 165x250mm
-
Rail Dimensions: 7mm
-
Category: Sportouring
-
Weight: 395g
-
Rail Material: Alloy
-
Road: Yes
-
MTB: Yes
Warranty Information
Selle Italia guarantees its products against material and/or manufacturing defects for twenty-four (24) months from the date of purchase, with the exception of consumable parts or parts subject to deterioration: the tax receipt issued by the authorised dealer constitutes proof of purchase. The defective product can be repaired or replaced by Selle Italia within this period if the defect is not due to negligence, improper use or incorrect installation.
Click Here to learn more about Selle Italia's Warranty Policy.
Installation & Maintenance
The seat post can affect the saddle’s structural resistance. The use of unsuitable seat posts can cause the saddle to malfunction and can lead to accidents and personal injury. For this reason, the product has been tested in accordance with the relevant sector regulations. Please check that your seat post is compatible with the information given in Figure 2. The seat post must be used according to the manufacturer’s recommendations. Moreover, it is important to observe the recommended torque values, as exceeding the defined values may jeopardise the safety and reliability of the saddle.
Click Here to learn more about the complete Installation and Maintanence process .
About Selle Italia
Leading The Way In Saddle Design for 120 years.
The great adventure of Selle Italia began just outside of Milan in the village of Corsico in 1897. Selle Italia was originally founded to make saddles for everyday bicycles used for transportation.
Back then, automobiles were an unaffordable for most and the bicycle was the transport of choice for many. Fast forward to the late 1970′s. The automobile had long replace the bicycle as a primary mode of transport and cycling was more for sport than anything.
The Bigolin family took over Selle Italia and began an upward trajectory that propelled Selle Italia to the top with continuous product innovation encompassing new construction techniques and using new materials. This innovation and vision has made Selle Italia the acknowledged #1 source for high-end bicycle saddles worldwide.
MADOVERBIKING (MOB) is not a manufacturer of products that are sold on the website. MOB is only a reseller/retailer/e-tailer selling brand products via distributors.
The warranty is as per the manufacturer and is covered by them.
However, MOB will only facilitate the warranty and claim process and will still ensure that you best utilize your investments and we help solve your queries & defective products as earliest as possible.
The Warranty Policy is different for different brands and is covered by the manufacturer and shall be applicable in the Indian subcontinent only. We have summarized the policies by various brands, and categories.
|
Brand/Category |
Warranty Duration |
|
Electronics |
Standard Brand Warranty*
|
| Maintenance | No warranty |
|
Accessories |
Standard Brand Warranty* |
| Apparels | No warranty unless the product is received in a damaged condition |
| Tires/Tubes | No warranty unless the product is received in a damaged condition |
|
Components |
Standard Brand Warranty* |
Warranty excludes
Brand warranty does not cover Product breakage, scratches, damages caused by accident, mishandling, negligence, shock, tampering and loss of components or accessories, improper use or storage of the product; unauthorized modifications or repairs; or normal wear & tear.
Warranty conditions
- This warranty will automatically terminate on the expiry of the warranty period.
- This warranty is valid only when purchased through madoverbiking.com
- The decision of the company (manufacturer/distributor) the nature of the defects and applicability of the warranty will be final.
- The company (manufacturer/distributor) will, in no event be liable or obligated for the payments/refund of any special incidental or consequential damages
Warranty Requirements
Please ensure all three requirements below are met for us to process your warranty claim:
- Please email/WhatsApp us the pictures of the product to be duly validated to support@madoverbiking.com/ 9315376395 along with the order ID/invoice.
- Serial number is mandatory for Melian products. Without a valid serial no., warranty claims will not be processed
- Pack all the products properly in One single box to avoid any transit-related damage.
- Please send back all accessories received along with the product to avoid any delays in the claim.
Please note that we do not cover return shipping costs for inbound warranty claims.
Standard Brand Warranty* - Warranty not explicitly mentioned by manufacturer, but can be discussed on a case-to-case basis. You may visit their respective website for further details.
We are still adding a lot of products and If you can't find any product, just message us on our whatsapp no. here and we will get it arranged for you
You can also email us at support@madoverbiking.com or call us at 9315376395
SHOCK ABSORBER SYSTEM
The special “Shock Absorbers” on the side of the ST7 Vision Superflow allow to accommodate the disconnections of the road and significantly increase comfort.
INTEGRATED SAFETY SYSTEM
The ST7 Vision Superflow is the first of Selle Italia’s saddles equipped with a rear LED that allows you to ensure visibility and safety even during the day.
GEL INSERTS
The special Gel inserts inside the padding allow the ST7 Vision Superflow to ensure a high level of comfort.
Specifications
-
Cover Material: Soft-Tek
-
Rail Material: FeC Alloy
-
Padding: Gel
-
Use: Road, MTB
-
Dimensions: 165x250mm
-
Rail Dimensions: 7mm
-
Category: Sportouring
-
Weight: 395g
-
Rail Material: Alloy
-
Road: Yes
-
MTB: Yes
Warranty Information
Selle Italia guarantees its products against material and/or manufacturing defects for twenty-four (24) months from the date of purchase, with the exception of consumable parts or parts subject to deterioration: the tax receipt issued by the authorised dealer constitutes proof of purchase. The defective product can be repaired or replaced by Selle Italia within this period if the defect is not due to negligence, improper use or incorrect installation.
Click Here to learn more about Selle Italia's Warranty Policy.
Installation & Maintenance
The seat post can affect the saddle’s structural resistance. The use of unsuitable seat posts can cause the saddle to malfunction and can lead to accidents and personal injury. For this reason, the product has been tested in accordance with the relevant sector regulations. Please check that your seat post is compatible with the information given in Figure 2. The seat post must be used according to the manufacturer’s recommendations. Moreover, it is important to observe the recommended torque values, as exceeding the defined values may jeopardise the safety and reliability of the saddle.
Click Here to learn more about the complete Installation and Maintanence process .
About Selle Italia
Leading The Way In Saddle Design for 120 years.
The great adventure of Selle Italia began just outside of Milan in the village of Corsico in 1897. Selle Italia was originally founded to make saddles for everyday bicycles used for transportation.
Back then, automobiles were an unaffordable for most and the bicycle was the transport of choice for many. Fast forward to the late 1970′s. The automobile had long replace the bicycle as a primary mode of transport and cycling was more for sport than anything.
The Bigolin family took over Selle Italia and began an upward trajectory that propelled Selle Italia to the top with continuous product innovation encompassing new construction techniques and using new materials. This innovation and vision has made Selle Italia the acknowledged #1 source for high-end bicycle saddles worldwide.
MADOVERBIKING (MOB) is not a manufacturer of products that are sold on the website. MOB is only a reseller/retailer/e-tailer selling brand products via distributors.
The warranty is as per the manufacturer and is covered by them.
However, MOB will only facilitate the warranty and claim process and will still ensure that you best utilize your investments and we help solve your queries & defective products as earliest as possible.
The Warranty Policy is different for different brands and is covered by the manufacturer and shall be applicable in the Indian subcontinent only. We have summarized the policies by various brands, and categories.
|
Brand/Category |
Warranty Duration |
|
Electronics |
Standard Brand Warranty*
|
| Maintenance | No warranty |
|
Accessories |
Standard Brand Warranty* |
| Apparels | No warranty unless the product is received in a damaged condition |
| Tires/Tubes | No warranty unless the product is received in a damaged condition |
|
Components |
Standard Brand Warranty* |
Warranty excludes
Brand warranty does not cover Product breakage, scratches, damages caused by accident, mishandling, negligence, shock, tampering and loss of components or accessories, improper use or storage of the product; unauthorized modifications or repairs; or normal wear & tear.
Warranty conditions
- This warranty will automatically terminate on the expiry of the warranty period.
- This warranty is valid only when purchased through madoverbiking.com
- The decision of the company (manufacturer/distributor) the nature of the defects and applicability of the warranty will be final.
- The company (manufacturer/distributor) will, in no event be liable or obligated for the payments/refund of any special incidental or consequential damages
Warranty Requirements
Please ensure all three requirements below are met for us to process your warranty claim:
- Please email/WhatsApp us the pictures of the product to be duly validated to support@madoverbiking.com/ 9315376395 along with the order ID/invoice.
- Serial number is mandatory for Melian products. Without a valid serial no., warranty claims will not be processed
- Pack all the products properly in One single box to avoid any transit-related damage.
- Please send back all accessories received along with the product to avoid any delays in the claim.
Please note that we do not cover return shipping costs for inbound warranty claims.
Standard Brand Warranty* - Warranty not explicitly mentioned by manufacturer, but can be discussed on a case-to-case basis. You may visit their respective website for further details.
